Hold Function (Animal Weighing Function) - KERN EOB Operating Instructions Manual

Hold function
(animal weighing
function)
There is no average value calculation in the event of too much movement
(heavy display oscillation).
20
The balance has an integrated animal weighing function (mean
value calculation). Using this function it is possible to weigh
domestic or small animals exactly (min. load 1% of the max.
one), although they do not stand quiet on the weighing plate.
Put upon weighing goods and press the HOLD key. In the
display the indicator [ ] starts flashing. During this time the
balance takes up several measured values and displays
then the calculated mean value.
This value remains in the display until the HOLD button is
pressed again. The indicator [ ] under [HOLD] goes out,
the balance returns into normal weighing mode.
Press the HOLD button once more to repeat this function
as often as required.
EOB/EOE_L/EOE_XL/EOS-BA-e-1030