Table of Contents
Advertisement
PUSH BAR
The push bar (fig. 32) is progressively
adjustable in height.
Height adjustment of the push
bar
The clamping screws (fig. 32.1/
to be loosened for stepless height ad-
justment. Loosen the clamping screws
so far that no damage to the coating
occurs during the adjustment.
Adjust the push bar to the desired
height.
After the adjustment retighten the
clamping screws (fig. 32.1/
Note:
When the spring button (fig. 32.1/
) engages underneath the clamp-
ing screw (fig. 32.1/
mum extension is reached.
– The spring button is to be pressed
down again to lower the push bar.
) are
32
).
32.1
) the maxi-
1
2
31
Advertisement
Table of Contents
