Faults: Causes And Cures; Fault-Finding Procedures; Trouble-Shooting Guide - Norton TT 250 G Operating Instructions Manual

7 Faults: causes and cures

7.1

Fault-finding procedures

Should any fault occur during the use of the machine, turn it off, and isolate it from the electrical
supply. Any works dealing with the electrical system or supply of the machine can only be carried
out by a qualified electrician.
7.2

Trouble-shooting guide

Trouble
Motor is not running
No water on the blade
Possible source
No electricity
Connection cable section too
small
Defective connection cable
Defective switch
Defective motor
Not enough water in the pan
Resolution
Check the electrical supply
(fuse for example)
Change connection cable
Change connection cable
CAUTION : can only be solved
by qualified electrician
Change motor or contact motor
manufacturer
Refill the water pan
15