Table of Contents
Advertisement
Your system supports five modes, numbered from 0 through 4, which
differ primarily in timing. When "Auto" is selected, the BIOS will
choose the best available mode.
The options are: Auto, (Default), Disabled.
Primary/Secondary Master/Slave Ultra DMA
DMA means Direct Memory Access. Ultra DMA is faster than DMA.
DMA is a method of transferring data to or from memory at a fast rate,
without involving the CPU.
When you select "Auto", the BIOS will choose the best available
mode.
The options are: Auto (Default), Disabled.
Onboard FDD Controller
When enabled, the floppy disk drive (FDD) controller is activated.
The options are: Enabled (Default), Disabled.
Onboard Serial Ports 1 & 2
If the serial ports use the onboard I/O controller, you can modify your
serial port parameters.
The options for Port 1 are: 3F8/IRQ4 (Default), 2E8/IRQ3, Disabled,
2F8/IRQ3, 3E8/IRQ4.
The options for Port 2 are: 2F8/IRQ3 (Default), 3E8/IRQ4, 2E8/IRQ3,
Disabled, 3F8/IRQ4.
The BIOS defaults screen contains the most appropriate values of the
system parameters that allow minimum system performance.
Chapter 9 Award BIOS Setup
8 7
Advertisement
Table of Contents
