Position Cross-Checking - Yaesu FTA-720 Operating Manual

Position Cross-checking

 Select two VOR stations on your aeronautical chart.
 Set the frequency of one of the VOR stations in
the VOR mode. The course indicator will show the
course deviation from the VOR radial. Note the ra-
dial you currently are on.
FTA-720 O
perATing
Vor n
aVIgatIon
Cross-checking Position
M
AnuAl
( a )
B
Ir and
 Now set the frequency of the other VOR station in
the VOR mode. Note the radial from the station you
are on.
 Extend the radials from each VOR station on the
chart. Your aircraft is located at the point where the
lines intersect.
33