Changing The Channel Step - Yaesu FTA-720 Operating Manual

Changing the Channel Steps
The FTA-720 allows you to choose channel steps in the
FM broadcast band: 5/10/12.5/15/20/25/50/100 kHz per
step. The FTA-720 is set up at the factory to 100 kHz
which probably is satisfactory for most operation. How-
ever, if you need to change the channel step increments,
the procedure to do so is very easy.
 Press and hold in the
stantly recalls Menu Item (Step).
 Press the key again to enable adjustment of this
Menu Item.
 Rotate the DIAL selector knob select the new chan-
nel step size.
 When you have made your selection, press the
key to save the new setting, then press the PTT key
repetitively until the radio exit to normal operation.
Note: The FTA-720 does not allow you to change the
channel steps in the Air band. On the Air band, the steps
are fixed at 25 kHz/step.
FTA-720 O
perATing
m
Iscellaneous
key for 2 seconds. This in-
M
AnuAl
s
ettIngs
43