The FTA-720's "Book" Memories also allow the user
to store, label, and recall channel frequencies which you
may want to use frequently by placing the FTA-720 into
the "Field Programming mode."
Memory Storage
Press and hold in both the PTT switch and
while turning the radio on, to activate the Field Pro-
gramming Mode. "FD" will appear at the upper left
corner on the display.
Select the desired frequency to be stored in the
Book Memory.
Press and hold in the
display will indicate a "Book" memory channel
number will blink on the LCD.
Within five seconds of releasing the
the DIAL selector knob to select the desired mem-
ory channel number for storage. In order to prevent
writing over memory channels, a "
appear at the right of the channel number to indicate
if the memory channel is vacant.
Now press and hold in the
you will now see the blinking "A" character on the
LCD. To attach an alpha/numeric name (label) to
the memory, proceed to the next step; otherwise
press and hold in the
44
F
p
Ield
rogrammIng
key,
key for 2 seconds. The
key, rotate
" icon will
key for 3 seconds;
key for 2 seconds to save
m
ode
the entry and exit.
To label a memory with an alpha/numeric name, the
next step is to use the DIAL selector knob to select
any of the 125 available characters (including let-
ters, numbers, and special symbols). Press the
key repeatedly to recall the desired letter, number,
and symbol in the first charactor slot (a
A a ...). When the desired first character appears,
press the
key momentarily to select it and move
on to the next character.
Select succeeding characters in the same manner,
pressing the
key momentarily after each selec-
tion.
After entering the entire name (eight characters
maximum), press the
all data for the channel.
Turn the radio off, then turn the radio back on again
to begin normal operation.
FTA-720 O
.
0
key for 2 seconds to save
M
perATing
AnuAl