Programming The Key Assignments - Yaesu FTA-720 Operating Manual

Menu Item.
 Rotate the DIAL selector knob to set the Time-Out
Timer to the desired "Maximum TX" time (1 min-
ute, 3 minutes or 5 minutes).
 When you have made your selection, press the
key to save the new setting, then press the PTT key
repetitively until the radio exit to normal operation.
Note: Because battery life is significantly enhanced by
making only brief transmissions from your radio, try
setting your FTA-720's TOT function to time out at one
minute.

Programming the Key Assignments

The key is a user-programmable key that may be set
up for a pair of functions you use particularly frequently.
The default key functions, as set up at the factory,
have been assigned to the ANL feature (press key) and
to the "Large Font" feature (press and hold key) at the
factory. These may be changed by the user, if you wish
to utilize another function or functions.
To program the function assigned to a key:
 Press the key, then press the
vate the Menu ("SET") mode.
 Rotate the DIAL selector knob to select Menu Item
"5. Key Set," then press the
40
m
Iscellaneous
 Rotate the DIAL selector knob to select Sub Menu
 Press the
 Rotate the DIAL selector knob to select the function
key to acti-
key.
s
ettIngs
Item "3. USER 1" (for the "press key" function) or
"4. USER 2" (for the "press and hold key" func-
tion), then press the key.
key again to enable adjustment of this
Menu Item.
you wish to assign to the button you selected in the
previous step. The available choices are:
Activates the Automatic Noise Limiter
ANL:
in the AM mode.
Exchanges the display locations be-
XFER:
tween the "frequency" and "Alpha-
numeric Tag" modes while operate
on the "Memory," "Book Memory,"
and "WX" modes. This also may be
used to exchange the display location
between the "frequency" and "Course
Indicator and TO/FROM flag" options
while operating on the "NAV" band.
SPEC Start: Activates the Spectrum Scope Monitor
feature.
Large Font: Switches the frequency display be-
tween the "Large Character" and
"Small Character" modes.
None
FTA-720 O M
perATing AnuAl