Brs ( B
CTCSS/DCS Bell Operation
During CTCSS Decoder or DCS Decoder operation,
you may set the FTA-720 up such that a ringing "bell"
sound alerts you to the fact that a call is coming in. Here
is the procedure for activating the CTCSS/DCS Bell:
Set the transceiver up for CTCSS Decoder or DCS
Decoder operation, as described previously.
Press the
key, then press the
vate the Menu ("SET") mode.
Rotate the DIAL selector knob to select Menu Item
"2. Sound," then press the
Rotate the DIAL selector knob to select Sub Menu
Item "2. Bell," then press the
Press the
key again to enable adjustment of this
Menu Item.
Rotate the DIAL selector knob to select "ON" (to
enable the CTCSS/DCS Bell).
Press the
key to save the new setting, then
press the PTT key repetitively until the radio exits
to normal operation.
When the CTCSS/DCS Bell
feature is enabled, the "
" icon appears at the bottom
center of the display. When a
38
r
s
usIness
adIo
erVIce
key to acti-
key.
key.
) c
o
hannel
peratIon
station calls you whose transceiver is sending a CTCSS
tone or DCS code which matches that set into your de-
coder, the "
" icon will blink, the BUSY/TX indicator
will flash in sequential colors, and a ringer will sound to
get your attention.
FTA-720 O
M
perATing
AnuAl