Table of Contents
Advertisement
4.3.2 COM3 / COM4 pin 9 output type setting (JP5)
Table 4-7: COM3/COM4 pin 9 setting (JP5)
*Normal operation
6
4
2
* default setting
Note:
4.4 VGA Interface
The panel PC's AGP VGA interface can drive conventional CRT
displays. It is also capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive LCD
and active LCD displays.
4.4.1 LCD panel power setting
The panel PC's AGP SVGA interface supports 5 V and 3.3 V LCD
displays. The LCD cable already has a built-in default setting. You do
not need to adjust any jumper or switch to select the panel power.
+5 V output
5
6
3
4
2
1
Pins 1, 3 and 5 are for COM3.
Pins 2, 4 and 6 are for COM4.
Chapter 4 Jumper Settings and Connectors
+12 V output
5
6
3
4
2
1
5
3
1
37
Advertisement
Table of Contents
