Security Reception - Muratec MFX-2590 User Manual

F-Code Tx
This function performs communications using a sub-address or password conforming to
ITU-T (International Telecommunication Union) standards. By creating F-code boxes for
which a sub-address or password has been registered, you can perform communications
1
regardless of the manufacturer or machine type.
Closed Transmission
When closed communication is set, fax messages cannot be transmitted and received 2
between Muratec machines only (excluding some models). If a passcode is set, faxes can
only be transmitted and received with machines that are the same product that also the
same passcode set.
ID Check Transmission
ID check transmission limits fax transmission to when the lower four digits of the fax
number you dialed and those registered in the destination machine match. Transmission
is allowed only when both digits are matched.
Confirmation Dial
When the confirmation dial function is set, a screen requiring you to reenter the
destination fax number will be displayed before starting transmission. Transmission is
allowed only when the first and second numbers match. Entering the destination twice
enables you check whether there has been a mistake when entering the number. This
prevents faxes from being transmitted to the wrong destination by mistake.

Security Reception

If security reception is set, documents received after the specified security reception
starting time are stored in memory and not printed. Since it is necessary to enter a
passcode to print the documents, this prevents received documents from being taken
away.
PIN mask
Your machine's PIN masking feature helps you keep that PIN (personal identification
number) private. With PIN masking activated, you can dial a number plus a PIN, but
the PIN will not appear in the journal, error message printout, delayed command list or
transmission report.
Auto Distribute
When a fax is received, it is distributed to a specified destination if its information
matches the conditions registered in advance. Up to 200 distribution settings can be
registered.
Separator Page
You can change the first sheet of paper with another type of paper to make it easier to
separate received documents. For example, if you use colored paper for the separator
page, it is easy to identify each individual fax job.
Box Documents
Documents transmitted or received with OfficeBridge can be previewed, printed and
transmitted.
e-mail Subject
When transmitting a scanned image via internet fax, you can edit the body and subject of the
e-mail to send. You can also enter the body of the e-mail using a template registered in advance.
Transmitting Faxes 2-31