Security Reception - Muratec MFX-2570 Administrator's Manual

Security Reception

This allows documents received after the security reception start time to be stored in
memory without being printed. This function makes it possible to store documents
received at night in the memory, for example, when no one is in the office. The received
documents in memory can be printed later.
Note
• To set security reception, it is necessary to set a protect passcode in advance.
page 2-7.)
• When security reception is enabled, it will start at the preset start time every day.
• When documents have been received during security reception, the message
"Security Reception document exists" is displayed and the information lamp
illuminates green.
• For details on printing the received documents that are stored, refer to Chapter 4,
"Security Functions" in the Scanner and Fax Guide.
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Security Communication].
5
Press [Secu
2-24

Security Reception

re Reception].
(See