Muratec MFX-2590 User Manual page 64

3
Select the copying method.
4
Select [Long Edge] or [Short Edge], and press [Enter]
Refer to the description on the page below to select the binding position. When copying a
two-sided document, select the binding position of the document. When copying a one-sided
document, select the binding position of the copy.
5
Press <Start>.
When you copy using the ADF, this will complete the operation.
Note
Refer to the following table when selecting the binding position.
Binding position
Long Edge
Short Edge
.
Image
Making Copies 2-5
1
2