Using a Folder Shortcut for Transmission
1
Load the document, and press <Scan>.
For details on loading documents, refer to
2
Press the [PC/USB] tab, and then [Folder].
3
Specify the folder shortcut.
•
If you loaded the document in the ADF, this concludes the procedure.
•
If you loaded the document on the document glass, load the next document, and press [Next
Doc]. To finish scanning, press [Complete].
Note
For details on registering folder shortcuts, refer to
page 3-6.)
"Loading
Documents".
(See page 1-36.)
"Registering Folder
Shortcuts".
(See
Scanning
2-13
1
2