Scanning to USB Memory
You can scan a document to a USB memory device that is directly connected to the
machine.
USB memory
Note
•
Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.
•
Support cannot be guaranteed with USB memory with embedded security functions,
memory card readers connected via USB, USB memory connected via an extension
cable and USB hub, and/or USB memory that does not meet USB standards.
•
If the USB memory becomes full during the scanning process the entire scan job
will be deleted. Therefore, make sure that the USB memory has enough free space
in advance.
•
If you want to connect the USB memory via an extension cable, use a cable that is
shorter than three meters.
1
Load the document, and press <Scan>.
For details on loading documents, refer to
2
Press the [PC/USB] tab, and then [USB].
"Loading
Documents".
(See page 1-36.)
Scanning
2-17
1
2