Contents Of The Box; A Guideline Of Your G Plus Genesis 500 Tool Set; Registering Your New Bike; Chapter 3: Basic Instructions - Prodeco Technologies Genesis 500 User Manual

d) Contents of the box
Check the contents of your box. Your new G Plus Genesis 500 should include the following items in the box or your
dealer should have included these items with your purchase:

G Plus Genesis 500 electric bicycle

Prodeco Vented Sport saddle (attached to the alloy seat post)

Prodeco Technologies 36V 9Ah LiFEPO4 removable battery

36V LiFEPO4 charger

Charger power cable

2 keys

Multi-use nickel plated tool set

G Plus Genesis 500 user guide

2 cable ties (for future use)
e) A guideline of your G Plus Genesis 500 tool set
The G Plus Genesis 500 includes a multi-use tool set. This tool set includes all the tools necessary to make
adjustments and service your new bicycle. The only additional tool you will ever need is an 18mm wrench to
remove the front wheel. All other tools are included with the tool kit. The tool kit includes the following tools:

Philips Screwdriver

Flat Head Screwdriver

2mm Hex Key

2.5mm Hex Key

3mm Hex Key

4mm Hex Key

5mm Hex Key

6mm Hex Key

8mm Socket

9mm Wrench

10mm Wrench

12mm Wrench

13mm Wrench

15mm Wrench

2 Tire Levers
f) Registering your new bike
For the warranty to take effect, you should register your new bicycle. Registration of your electric bicycle with us is
the only way we can acknowledge who is the established owner. Your bicycle has 3 individual and unique serial
numbers (frame, motor and battery). Each serial number must be registered when filling out the registration form.
The serial number on the frame is located under the crank/bottom bracket portion of the frame. The serial number
for the motor is found on the motor's side. The serial number for the battery is located on the barcode label adhered
to the underside of the battery. These numbers should be recorded and registered in case of warranty issues or
theft. Please review Chapter 10 "Warranty Service and Repair" section c "Registering your bicycle" on registering
your G Plus Genesis 500. You can register by either filling out the online registration form or by sending us the
registration card found in Chapter 10 "Warranty Service and Repair" section d "Registration card".

Chapter 3: Basic Instructions

a. Bicycle Fit
It is very important your G Plus Genesis 500 is properly adjusted for comfort and to avoid the possibility of losing
control while riding. The saddle and handlebar have adjustments available to allow riders from 5' 6" to 6' 6" to set
the proper measurements allowing for a safe and comfortable riding position. There are saddle height, rotation and
distance to steering tube adjustments and also a handlebar height and rotation adjustment. When adjusting the
saddle height, it is recommended if you plan to use your electric bicycle also as a traditional pedal bicycle you
adjust the saddle height to allow for a full leg extension when pedaling. The ball of your foot when resting on the
pedal should only allow for a slight bend at the knee when sitting. Please review the following points in determining
how to make the correct adjustments. The subsequent sections will assist you with making these adjustments.
1) Is your bike adjusted to your size?
2) To check, see Chapter 5 "Perfect Fit and Ride". If your bicycle is not properly adjusted for you, you may
lose control and fall.
8