Familiarize Yourself With Your Bicycle's Parts; Contents Of The Box; A Guideline Of Your Mariner Tool Set; Registering Your New Bike - Prodeco Technologies Mariner User Manual

c) Familiarize yourself with your bicycle's parts
d) Contents of the box
Check the contents of your box. Your new Mariner should include the following items in the box or your dealer should
have included these items with your purchase:

Mariner electric bicycle

Velo Plush GEL saddle

Prodeco Tech 36V 6Ah LiFEPO4 battery

36V LiFEPO4 charger
e) A guideline of your Mariner tool set
The Mariner includes a multi-use tool set. This tool set includes all the tools necessary to make adjustments and service
your new bicycle. The only additional tool you will ever need is an 18mm wrench to remove the front wheel. All other
tools are included with the tool kit. The tool kit includes the following tools:

Philips Screwdriver

Flat Screwdriver

2mm Hex Key

2.5mm Hex Key
f) Registering your new bike
For the warranty to take effect, you must register your new bicycle. Registration of your electric bicycle is the only way we
can acknowledge and verify the established owner. Your bicycle has 3 individual and unique serial numbers (frame,
motor and battery). Each serial number must be registered when filling out the registration form. The serial number on
the frame is located under the crank/bottom bracket portion of the frame. The serial number for the motor is found on the
motor's side. The serial number for the battery is located on the barcode label adhered to the underside of the battery.
These numbers should be recorded and registered in case of warranty issues or theft. Please review Chapter 10
―Warranty Service and Repair‖ section c ―Registering your bicycle‖ how to register your Mariner. You can register by
either filling out the online registration form at www.prodecotech.com/register-your-bike/ or by sending the registration
card found in Chapter 10 ―Warranty Service and Repair‖ section d ―Registration card‖.

3mm Hex Key

4mm Hex Key

5mm Hex Key

6mm Hex Key

Charger power cable

2 keys

2 Piece Multi-use nickel plated tool set

2 cable ties (for future use)

8mm Socket

8mm Wrench

10mm Wrench

12mm Wrench

13mm Wrench

15mm Wrench

2 Tire Levers
6