Storing The Battery; Battery Power Indicator - Prodeco Technologies Genesis 500 User Manual


The battery includes a battery indicator also to check for charging. The indicator can be found under
the left side battery handle. Press the indicator button to display the battery's energy storage

Once the battery is charged, you should discontinue charging and remove the charger.

Unplug the charger's power cord from the wall and remove the charging plug from the battery.

You can now lower the handle over the RCA charging input and you are ready to install the battery
pack back onto your bicycle.
e. Storing the battery
The Li-ion battery the G Plus Genesis 500 utilizes is the safest and latest technology in Li-ion battery cells. It is
recommended depending on where you store your bicycle that you do not keep the battery in extremely hot
conditions. If the bicycle is being stored indoors in a cool environment, the battery should be stored on the bicycle
in the "OFF" position. The battery should be kept away from fires or sparks and also away from possible water
damage. There is not much else to worry about with LiFEPO4 battery systems.
f.

Battery power indicator

The G Plus Genesis 500 has a 3 LED indicator at the handlebar throttle displaying the battery power available.
There is also a battery indicator on the battery itself with a 3 LED light display. The LED indicator on the throttle is
explained in Chapter 9: Electrical Components, section d. "Throttle". The indicator on the battery is explained
below. The battery indicator has 3 LEDs displaying 3 levels of power. When pressing the indicator button, the lights
will light according to power storage. When pressing the button, if the 3 LEDs light up, the battery is at over 50%
power to full. If only 2 LEDs light up, the battery is at 50% power or possibly less and should be charged. If only 1
LED lights up, the battery is near completion and should be charged immediately. (SEE PHOTOS BELOW)
37