Chapter 4: Safety; The Basics - Prodeco Technologies Genesis 500 User Manual


Insert the charger's power cord into a wall outlet.

The charger's LED light will light RED while the charger is charging the battery.

The charger's LED light will light GREEN upon the battery being fully charged.

There is also a battery indicator for checking a full charge. Press the indicator button to display the
battery's energy storage. The indicator is located under the battery handlebar.

Once the battery is charged, you should discontinue charging and remove the charger.

Unplug the charger's power cord from the wall and remove the charging plug from the battery.

You are ready to install the battery pack back onto your bicycle.

To install the battery, first align the bottom of the battery with the battery base rail.

Once aligned, slide the battery completely into the battery base and until the battery base terminals
insert into the battery's terminal outlets.

Once the battery is properly slid into place, you can then turn the key to the "ON" position.

The LEDs on the throttle in the "ON" position will display a charged battery's energy capacity.

Chapter 4: Safety

The manual has detailed safety riding methods. In this chapter we will further discuss additional safety guidelines.
a. The basics
Below is a basic guideline according to the CPSC (US Consumer Product Safety Commission) in regards to riding
a bike safely.

Always wear a

Observe all traffic laws and signals, just as automobiles must do.

Don't ride double or attempt stunts.

Ride near the curb in the same direction as traffic.

Find alternate routes, rather than ride through busy intersections and heavy or high-speed traffic.

Walk -- don't ride -- your bicycle across busy intersections and left turn corners.

Avoid riding in wet weather. When wet, handbrakes may require a long distance to stop.

Avoid riding in the dark. If you do, be sure the bike is equipped with a headlight, a taillight and
reflectors. Apply retro-reflective trim to clothing, or wear reflective vests and jackets.

Avoid loose clothing or long coats that can catch in pedals or wheels. Leg clips or bands keep pants
legs from tangling in the chain.

Avoid crossing raised sewer grates.

Regular maintenance is essential for safe riding. Refer to the maintenance recommendations. If you do
not have basic mechanical skills, an authorized dealer should perform repairs and

Align (or "true") wobbly wheels for better control. Spokes also may need adjustment.

Replace all missing, damaged, or worn parts; for example, brake pads, chainguards, chain links,
spokes, screws and bolts, handlebar grips.
helmet to help prevent head injuries.
maintenance.
17