Table of Contents
Advertisement
Anti-Carjacking Protection
The system is equipped with three separate Anti-Carjacking protection features
(ignition, open door, or by the transmitter)� All three are programmable, and must be
turned on to operate� Once activated, the user has 53 seconds to cancel the Anti-
Carjacking protection process by pressing the Valet Switch once� If Anti-Carjacking is
not cancelled, 53 seconds after being activated the siren will begin to chirp for 7 sec-
onds to alert the user that the system is about to enter into an alarm condition� The
Valet Switch may still be pressed once during this period to cancel the Anti-Carjacking
process�
If the Anti-Carjacking process is not cancelled before the 60 second countdown
expires, the system will enter an alarm condition, sounding the siren and flashing the
parking lights� 30 seconds after this occurs, or should the ignition be turned off in the
meantime, the stater interrupt will engage� Once the system enters the alarm condi-
tion, it will not respond to the transmitter, nor will the system reset automatically after
60 seconds, and it can only be disengaged by:
Step 1 Turning the vehicle's ignition off�
Step 2 Turning the ignition back on�
Step 3 Within 5 seconds, perform an Emergency Override using the Valet Switch� If
the SecureCode has been customized, the correct number of Valet Switch presses
must be made�
The three types of Anti-Carjacking protection features are:
Ignition Activated Anti-Carjacking activates every time the vehicle's ignition is
turned on� The Valet Switch must be pressed within 60 seconds of activating to can-
cel Anti-Carjacking� This is User Programmable Feature #17�
Door Anti-Carjacking activates when a door is opened after the vehicle is started
and the engine is running� The Valet Switch must be pressed within 60 seconds after
activation to cancel Anti-Carjacking� This is User Programmable Feature #18�
Transmitter Anti-Carjacking is activated by pressing and holding the "Ch3" icon
(1-way transmitter: "trunk & "start") for 3 seconds, while the vehicle's ignition is on�
The Valet Switch must be pressed within 60 seconds after this is done to cancel Anti-
Carjacking� This is User Programmable Feature #19�
Programming Controllers/Transmitters
Standard Programming: Using this method to program additional or replace-
ment transmitters does not turn on or otherwise affect the Unauthorized Transmitter
Alert (UTA) feature� Before you begin, have all transmitters which are to operate the
system at hand and make sure the correct vehicle profile (see page 14) is selected on
the controller(s)*�
Step 1 Then, turn the ignition "on"�
Step 2 Within 5 seconds of Step 1, press the Valet Switch 5 times� The siren/horn will
briefly sound, confirming that the system is ready to learn a transmitter code.
18
Advertisement
Table of Contents
