Table of Contents
Advertisement
Printer functions
1.
Connect the printer and PC via USB cable.
2.
Turn ON printer and start DiagTool utility.
3.
Click the "Function" button for settings.
4.
The detail functions in the Printer Function Group are listed as below.
For more information about Diagnostic Tool, please refer to the diagnostic utility
quick start guide on the CD disk \ Diagnostic Utilities directory
(Calibrate sensor, media setup, RTC setup...)
Function
Calibrate Sensor
Ethernet Setup
RTC Setup
Factory Default
Reset Printer
Print Test Page
Configuration Page
Dump Text
Ignore AUTO.BAS
Exit Line Mode
Password Setup
~ 37 ~
Description
Calibrate the sensor specified in the Printer Setup
group media sensor field
Setup the IP address, subnet mask, gateway for
the on board Ethernet
Synchronize printer Real Time Clock with PC
Initialize the printer and restore the settings to
factory default.
Reboot printer
Print a test page
Print printer configuration
To activate the printer dump mode.
Ignore the downloaded AUTO.BAS program
Exit line mode.
Set the password to protect the settings
.
Advertisement
Table of Contents
