AMT Datasouth Fastmark M4 Series User Manual page 47

Printer Option
Feed
Calibration
Media
Power Up
Length
No Motion
This option is used to set the action of the media when you
turn on the printer:
Printer Option
Feed
Calibration
Head Close
Length
No Motion
This option is used to set the action of the media when you
close the print head:
This option is used to adjust print position vertically on
Label Top
the label. The range is -120 to +120 dots.
This option is used to adjust print position horizontally on
Left Position
the label. The range is -9999 to +9999 dots.
NOTE:
If printing from enclosed software/driver, the
software/driver will send out the commands, which
will overwrite the settings set from the panel.
Description
Printer will advance one label.
Printer will calibrate the sensor levels,
determine length and feed label.
Printer determines length feeds label.
Printer will not move media.
Description
Printer will advance one label.
Printer will calibrate the sensor levels,
determine length and feed label.
Printer determines length feeds label.
Printer will not move media.
~ 47 ~
No
Motion
No
Motion
0
+0000