A
r
+ Se
ver 1022TC-IBQF/1022TC-TF User's Manual
1-2
Motherboard Features
At the heart of the A+ Server 1022TC-IBQF/1022TC-TF lies two H8DCT-F/IBQF dual
processor motherboards based upon one AMD SR5670 chipset and one SP5100
Southbridge chipset. Below are the main features of the H8DCT-F/IBQF. Note that
the features on each board are doubled for the server, which includes two nodes.
Processor
Each H8DCT-F/IBQF supports up to two AMD Opteron 4000 series (AMD Socket C32
type) processors. Please refer to our web site for a complete listing of supported
processors (www.supermicro.com).
Memory
Each H8DCT-F/IBQF serverboard has Twelve (12) dual channel DIMM slots that
can support up to 64 GB of ECC/Non-ECC UDIMM or up to 192 GB of ECC RDIMM
DDR3-1600/1333/1066 Mhz in 1 GB, 2 GB, 4 GB, 8 GB or 16 GB sizes of 1.5V
or 1.35V voltages.
Onboard SATA
A SATA controller is built into the AMD SP5100 chipset to provide support for a four
port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1 and 10 compatible.
PCI Expansion Slots
Each H8DCT-F/IBQF has one (1) PCI-Express x16 Gen. 2 slot.
Onboard Controllers/Ports
Onboard I/O backpanel ports include one COM port, a VGA port, two Gb LAN ports, a
dedicated IPMI LAN port, two USB ports and one single QSFP InfiniBand connector
(H8DCT-IBQF only). Two USB headers are included on the motherboard.
InfiniBand
The AS 1022TC-IBQF server includes a QDR (quad data rate) speed InfiniBand
QSFP connector. InfiniBand is a scalable serial communications link intended for
connecting processors with high-speed peripherals
1-2