Table of Contents
Advertisement
A+ Server 1022TC-IBQF/1022TC-TF User's Manual
Replacing the Power Supply
Installing a Power Supply
1. Power down both system nodes with the main power buttons on the control
panel, then unplug the AC power cord.
2. Push the release tab on the back of the power supply as illustrated.
3. Pull the power supply out using the handle.
4. Push the new power supply module into the power bay until it clicks into place.
5. Plug the AC power cord back into the module and power up the server nodes.
Figure 6-9. Removing the Power Supply
Release Tab
6-8
Advertisement
Table of Contents
