Table of Contents
Advertisement
A
r
+ Se
ver 1022TC-IBQF/1022TC-TF User's Manual
1-3
Server Chassis Features
The following is a general outline of the main features of the SC808T-920B 1U
twin rackmount server chassis. Details on the chassis can be found in Chapter 6.
System Power
The SC808T-920B chassis includes a single high-efficiency 920W power supply,
which provides the power to both serverboards housed in the chassis.
SATA Subsystem
The SC808 chassis was designed to support four SATA hard drives, which are
hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA drives (RAID 0, 1 and 10 supported).
Control Panel
The SC808 features two independant control panels, one associated with each node
(serverboard). LEDs indicate power on, network activity, hard disk drive activity and
system overheat. The control panel also includes a main power button and a system
reset button as well as a UID LED.
Expansions Cards
The SC808 supports the use of two low profile PCI-E expansion cards.
Cooling System
The SC808 chassis has an innovative cooling design that features an air shroud
and three sets of 4-cm counter-rotating fans per node (configured as six fans placed
back to back in pairs). A fan speed control setting in BIOS allows fan speed to be
determined by system temperature.
1-4
Advertisement
Table of Contents
