5-7
Adding PCI Expansion Cards
The 1022TC-IBQF/1022TC-TF includes two preinstalled riser cards designed to
support two low-profile PCI Express x16 cards to fit inside the chassis.
Installing an Expansion Card
1. After powering down the system, remove the PCI slot shield.
2. Fully seat the card into the slot on the riser card, pushing down with your
thumbs evenly on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the rear of the
chassis. The PCI slot shield protects the motherboard and its components
from EMI and aid in proper ventilation.
Chapter 5: Advanced Motherboard Setup
5-11