Configuring Guest Net; Configuring Advanced Wireless Settings - Cisco CVR100W Administration Manual

Configuring Wireless Network

Configuring Advanced Wireless Settings

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Configuring Advanced Wireless Settings
!
CAUTION
STEP 1
STEP 2
Cisco CVR100W Wireless-N 300M Router Administration Guide

Configuring Guest Net

The SSID4 (default name: cisco-guest) is used for guests. The guests can access
the Internet through this SSID, and the internal network security would not be
affected.
To configure Guest Net settings:
In the Wireless Table (Wireless > Basic Settings), check the SSID 4.
Click Edit Guest Net. The Guest Net Settings page appears.
In the Guest Password field, enter an alphanumeric phrase (8 to 63 ASCII
characters or 64 hexadecimal digits).
Check Hide Password to show the password in ciphertext.
In the Lease Time field, set the guest least time (range: 1 to 9999 min, default: 120
min).
In the Total Guest Allowed field, set the maximum number of the guest
connections allowed.
Click Save to save your settings.
Click Back to go back to the Basic Settings page.
Advanced wireless settings should be adjusted only by an expert administrator;
incorrect settings can reduce wireless performance.
To configure advanced wireless settings:
Choose Wireless > Advanced Settings. The Advanced Settings page appears.
Configure these settings:
3
61