Viewing System Summary - Cisco CVR100W Administration Manual

Viewing CVR100W Status

Viewing System Summary

Viewing System Summary
STEP 1
STEP 2
STEP 3
Cisco CVR100W Wireless-N 300M Router Administration Guide
IPv4 Address
IPv6 Address
State
Wireless Networks
Displays the status of all four predefined SSIDs. To view complete wireless
settings, click details. See
Signal Strength
cisco-xxxx
VPN
QuickVPN Users
The System Summary page displays a summary of the CVR100W's settings.
To view a summary of system settings:
Choose Status > System Summary.
From the Refresh Rate drop-down menu, choose a refresh rate.
The System Summary page displays the following information:
System Information
Firmware Version
IPv4 address of the WAN port.
IPv6 address of the WAN port (if IPv6 is enabled).
Shows if the WAN port is active or inactive for routing.
If the WAN port is active for routing, the WAN state
shows "Up." If the WAN port is inactive for routing, the
WAN state shows "Down."
NOTE The state "Down" means that the network
detection fails.
Viewing Wireless Statistics
Shows if the Wi-Pi signal strength is 100%, 50%, or
off.
Shows if the predefined SSID is enabled or disabled.
Number of QuickVPN users.
Firmware version that the CVR100W is currently
using.
8
for more information.
106