Cisco CVR100W Administration Manual page 17

Introduction
Connecting the CVR100W
STEP 5
STEP 6
STEP 7
Cisco CVR100W Wireless-N 300M Router Administration Guide
Skip this step if you want to connect the PC to the CVR100W through a
NOTE
wireless connection.
Power on all connected devices, including the cable or DSL modem and the PC,
and wait until the connections are active.
Press the POWER button on the back panel to power on the CVR100W.
To connect the PC to your wireless network for the first time, you must configure
the wireless connection using the default SSID name and pre-shared key. See
Connecting to Your Wireless Network
A sample configuration is illustrated below.
Internet
Access
Devices
for more information.
Power
Network
Supply
Devices
1
Wireless
Devices
15