Viewing Wireless Statistics - Cisco CVR100W Administration Manual

Viewing CVR100W Status

Viewing Wireless Statistics

Viewing Wireless Statistics
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco CVR100W Wireless-N 300M Router Administration Guide
Collisions
The Wireless Statistics page shows a cumulative total of relevant wireless
statistics for the radio on the CVR100W.
To view wireless statistics:
Choose Status > Wireless Statistics.
From the Refresh Rate drop-down menu, choose a refresh rate.
(Optional) By default, byte data is displayed in bytes and other numerical data is
displayed in long form. To show the bytes in kilobytes (KB) and the numerical data
in rounded up form, check Show Simplified Statistic Data and click Save.
To reset the wireless statistics counters, click Clear Counters.
The Wireless Statistics table displays the following information:
SSID Name
Packet
Byte
Error
Number of signal collisions that occurred on this port.
A collision occurs when the port tries to send data at
the same time as a port on another router or computer
that is connected to this port.
Name of the wireless network.
Number of received and sent wireless packets for
each SSID, and total number of received and sent
wireless packets for all SSIDs.
Number of received and sent bytes of information for
each SSID, and total number of received and sent
bytes of information for all SSIDs.
Number of received and sent packet errors for each
SSID, and total number of received and sent packet
errors for all SSIDs.
8
111