Configuring Ip Mode - Cisco CVR100W Administration Manual

Configuring Network

Configuring IP Mode

Configuring IP Mode
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N 300M Router Administration Guide
Wide area network configuration properties are configurable for both IPv4 and
IPv6 networks. You can enter information about your Internet connection type and
other parameters in these pages.
To select an IP mode:
Choose Networking > IP Mode.
From the IP Mode drop-down menu, choose one of the following options:
LAN:IPv4, WAN:IPv4
LAN:IPv6, WAN:IPv4
LAN:IPv6, WAN:IPv6
LAN:IPv4+IPv6,
WAN:IPv4
LAN:IPv4+IPv6,
WAN:IPv4+IPv6
(Optional) If you are using 6to4 tunneling, which allows IPv6 packets to be
transmitted over an IPv4 network, do the following:
• Click Show Static 6to4 DNS Entry.
• In the Domain and IP fields, enter up to 5 domain-to-IP mappings.
The 6to4 tunneling feature is typically used when a site or end user wants to
connect to the IPv6 Internet using the existing IPv4 network.
Click Save.
Choose this option to use IPv4 in the LAN and WAN
ports.
Choose this option to use IPv6 in the LAN ports and
IPv4 in the WAN ports.
Choose this option to use IPv6 in the LAN and WAN
ports.
Choose this option to use IPv4 and IPv6 in the LAN
ports and IPv4 in the WAN ports.
Choose this option to use IPv4 and IPv6 in the LAN and
WAN ports.
2
39