Configuring Time Of Day Access - Cisco CVR100W Administration Manual

Configuring Wireless Network
Configuring Basic Wireless Settings
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco CVR100W Wireless-N 300M Router Administration Guide
In the Connection Control field, choose the type of access to the wireless
network:
• Prevent: Select this option to prevent devices with the MAC addresses
listed in the MAC Address Table from accessing the wireless network. This
option is selected by default.
• Permit: Select this option to allow devices with the MAC addresses listed in
the MAC Address Table to access the wireless network.
To show computers and other devices on the wireless network, click Show Client
List.
In the Save to MAC Address Filter List filed, check the box to add the device to
the list of devices to be added to the MAC Address Table.
Click Add to MAC to add the selected devices in the Client List Table to the MAC
Address Table.
Click Save to save your settings.
Click Back to go back to the Basic Settings page.

Configuring Time of Day Access

To further protect your network, you can restrict access to it by specifying when
users can access the network.
To configure Time of Day Access:
In the Wireless Table (Wireless > Basic Settings), check the network that you
want to configure.
Click Time of Day Access. The Time of Day Access page appears.
In the Active Time field, check the Enable box to enable Time of Day Access.
In the Start Time and Stop Time fields, specify the time of day period when
access to the network is allowed.
Click Save to save your settings.
Click Back to go back to the Basic Settings page.
3
60