Cisco CVR100W Administration Manual page 56

Configuring Wireless Network
Configuring Basic Wireless Settings
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
Cisco CVR100W Wireless-N 300M Router Administration Guide
B/G-Mixed Choose this option if you have Wireless-B and Wireless-G
devices in your network.
G/N-Mixed Choose this option if you have Wireless-G and Wireless-N
devices in your network.
In the Wireless Band Selection field, select the wireless bandwidth on your
network (20MHz, 20/40MHz, or 40MHz).
In the Wireless Channel field, choose the wireless channel from the drop-down
menu or choose Auto to let the system determine the optimal channel to use
based on the environmental noise levels for the available channels.
In the AP Management VLAN field, choose VLAN 1 if you are using the default
settings.
If you create additional VLANs, choose a value that corresponds with the VLAN
configured on other switches in the network. This is done for security purposes.
You might need to change the management VLAN to limit access to the
CVR100W's Device Manager.
(Optional) In the U-APSD (WMM Power Save) field, check Enable to enable the
Unscheduled Automatic Power Save Delivery (U-APSD) feature, also referred to as
WMM Power Save, that allows the radio to conserve power.
U-APSD is a power saving scheme optimized for real-time applications, such as
VoIP, transferring full-duplex data over WLAN. By classifying outgoing IP traffic as
Voice data, these types of applications can increase battery life by approximately
25% and minimize transmit delays.
(Optional) In the Wireless table, configure the settings of the four wireless
networks. See Configuring Wireless Network
Click Save.
Settings.
3
54