Cisco CVR100W Administration Manual page 13

Introduction
Getting to know the CVR100W
Cisco CVR100W Wireless-N 300M Router Administration Guide
LAN (1-4) The numbered lights correspond to the LAN ports on the back
panel of the CVR100W.
WPS
Wireless
WAN
POWER
• Solid green or blue when the CVR100W is connected to
a device through the corresponding LAN port (1, 2, 3, or
4).
• Flashes green or blue when the CVR100W is sending or
receiving data over that LAN port.
• Off when the LAN port has no connection.
• Solid green or blue when the WPS connection is
configured.
• Flashes green or blue once per second when the WPS
progess is experiencing problems.
• Off when the WPS connection is configured or there is
no WPS connection.
• Solid green or blue when the wireless module is enabled
with 100% Wi-Fi power.
• Solid amber when the wireless module is enabled with
50% Wi-Fi power.
• Flashes when the CVR100W is sending or receiving data
on the wireless module.
• Off when the wireless module is disabled.
• Solid green or blue when the CVR100W is connected to
the Internet through your cable or DSL modem.
• Flashes green or blue when the CVR100W is sending or
receiving data through the WAN port.
• Off when the WAN port has no connection.
• Solid green or blue when the CVR100W is powered on
and is operating normally.
• Flashes green or blue when the system is booting or the
system is upgrading the firmware.
• Off when the CVR100W is powered off.
1
11