Pabx And Transfer; Setting Pabx - Brother MFC-890 User Manual

PABX and TRANSFER

The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the machine supports timed break recall only (TBR),
PBXS normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
Tel/R
when the

Setting PABX

If the machine is connected to a PABX system, set PBX to ON. If not,
set OFF.
1
Menu/Set
Press
2
Press
OFF).
Menu/Set
Press
3
Stop/Exit
Press
You can program a
in a Speed Dial location. When programming the Speed dial
number (Function menu 2-3-1) press
displays "!"), then enter the telephone number. If you do this,
you do not need to press
a Speed Dial location. (See Storing numbers for easy dialing on
page 7-1.)
However, if PBX is set to OFF, you can't use the Speed Dial
number that a
key is pressed.
1 5
, , .
or to select ON (or
.
.
Tel/R
Tel/R
Tel/R
keypress is programmed into.
GENERAL SETUP
5.PBX
keypress as part of a number stored
Tel/R
each time before you dial using
first (the screen
INITIAL SETUP 4 - 7