Brother MFC-890 User Manual page 260

When you take out a media card, do the following to keep from
damaging it:
1
In the My Computer window, right-click the removable disk icon
and select Eject from the Context menu.
2
Wait until the LED on the MFC stops blinking before taking out
the media card.
Do NOT unplug the power cord, USB cable or remove a
SmartMedia
the machine while the machine is reading the card (LED is
flashing). You will loose your data or damage the card.
If you took out the media card while the LED was flashing, you must
immediately restart your PC before putting the media card back in. If
you put in another media card before the PC is rebooted, the data on
it may be destroyed.
While the machine is printing from the PhotoCapture Center
the PC cannot access the PhotoCapture Center
operation.
If two or three media cards are inserted at the same time, the
PhotoCapture Center
first. To have access to another card, you must first take out all
the cards, and then put in the media card you wish to access.
USING THE PHOTOCAPTURE CENTER
™
, CompactFlash
™
will read only the card that was put in
™
or Memory Stick
™
FROM YOUR PC 18 - 3
™
card from
™
,
™
for any other