Setting The Phone Line Type; Pabx And Transfer - Brother MFC-3320CN User Manual

Setting the Phone Line Type

If you are connecting this machine to a PBX or PABX, you need to
change the Phone Line Type to PBX by completing the following
steps. If you are connecting this machine to a phone line that is also
using a ADSL (Asymmetric Digital Subscriber Line) to send and
receive faxes, it is also necessary to change the Phone Line Type to
ADSL by completing the following steps.
1
Menu/Set
Press
2
Press
ADSL (or Normal ).
Menu/Set
Press
3
Stop/Exit
Press

PABX and TRANSFER

The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the machine supports timed break recall only (TBR),
PABX normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
Tel/R
when the
You can program a
in a One-Touch or Speed-Dial location. When programming the
One-Touch or Speed-Dial number (Function menu 2-3-1 or
2-3-2) press
enter the telephone number. If you do this, you do not need to
Tel/R
press
One-Touch or Speed-Dial location. (See Storing numbers for
easy dialling on page 7-1.)
However, if PBX is set to Off , you cannot use the One-Touch
or Speed-Dial number that the
into.
4 - 5 GETTING STARTED
0 5
, , .
or to select PBX ,
.
.
key is pressed with
Tel/R
keypress as part of a number stored
Tel/R
first with
Shift
with each time before you dial using a
5.Phone Line Set
Shift
key.
Shift
(the screen displays "!"), then
Tel/R
key press is programmed