Turning The Mfc On And Off; Turning The Mfc Off; Turning The Mfc On; Turning Off The Scanner Lamp - Brother MFC-890 User Manual

Turning the MFC on and off

When the MFC is idle, you can turn it on and off by pressing the
ON/OFF
key. In OFF mode, the MFC will send delayed faxes that
have been set up and can still receive faxes in FAX ONLY mode. You
can even retrieve faxes using remote retrieval if you are away from
your MFC. If you want to do other operations, you must turn the
machine back on.

Turning the MFC off

Press and hold down the
until the LCD shows:
The LCD and scanner light will go off.

Turning the MFC on

Press and hold down the
until the LCD shows:
The LCD will show the date and time
(standby mode).
Even if you turned the MFC off, it will periodically clean the print
head to preserve print quality.
If you unplug the AC power cord, no MFC operations will be
available.

Turning Off the Scanner Lamp

The scanner lamp stays on for 16 hours before switching off to
preserve the life of the lamp. You can turn off the scanner lamp
manually if you wish by pressing the
The scanner lamp will remain turned off until the next time you use
the scanning feature.
Turning off the scanner lamp will also reduce the power
consumption.
Please note that turning the lamp off regularly will reduce the
lamps life.
ON/OFF
key
ON/OFF
key
and
SHUTTING DOWN
PLAIN
PLEASE WAIT
keys simultaneously.
INTRODUCTION 1 - 5
01