Dip Switch Guidelines - Gefen 4x4 HDMI Matrix User Manual

Inside the 4x4 HDMI Matrix is a bank of Dip Switches. Below is a table describing their
functions. By default, all switches are set to the Off position.
Dip Switch #
1 Switching Delay
2 On Board EDID
3 IR Code Dip Switch
4 IR Code Dip Switch
5
6
7
8
How to open the 4x4 HDMI Matrix:
To access the dip switches, fi rst remove the 10 hex nuts on the back of the unit (8 lo-
cated above each HDMI port and 2 adjacent to the RS232 port). Remove the 5 Philips
screws under the unit and the 4 screws on each side of the unit. Now carefully remove
the cover of the 4x4 HDMI Matrix.

DIP SWITCH GUIDELINES

Name
Corresponds to Dip Switch 1 on RMT16-IR
Corresponds to Dip Switch 2 on RMT16-IR
Unused
Unused
Unused
Edge Select
1 2 3 4
6
Description
Adds a 3 second delay to switching
Feeds a Generic HDMI EDID (720p/1080i)
to all Inputs
+Edge Pixels
5 6 7 8