PPPoE, select PPPoE from the Encapsulation drop-down menu. For
details, refer to 4.4 "Configuring the PPPoE Mode".
4.6 Configuring the RFC2684B Mode
This section mainly introduces how to configure the MT882 in the
RFC2684B mode and how to configure your computer to access the
network through the MT882.
4.6.1
Preparation
Table 4-4 shows the configuration preparation.
Table 4-4 Configuration for the RFC2684B mode
Name
PVC mode
Active
Default route
NAT
VPI/VCI
Encapsulation
IP address/subnet
mask
IP address of the
gateway
RIP
Routing
Yes
Enable
Enable
Provided by the ISP
RFC2684B
IP address and subnet mask for the MT882 to
access the network are provided by the ISP
IP address of the gateway for the MT882 to
access the network is provided by the ISP
Disabled
37
Configuration