Steps - Huawei SmartAX MT882 User Manual

Active
Default route
NAT
VPI/VCI
Encapsulation
Username and password for
the PPPoE dial-up
Service Name
RIP
DHCP mode of the MT882
Note:
After the DHCP server is enabled, the MT882 can assign a private IP
address to the computer.
4.4.2

Steps

I.
Configuring the MT882
The steps are as follows:
1) Log in to the Web setup page. For details, see section
2.3 "Setting Up the Configuration Environment."
Item Configuration
Yes
Enable
Enable
Provided by the ISP
PPPoE
Provided by the ISP
Specified by users
Disabled
Enable the DHCP server
35