4.3 Configuring the Pure Bridge Mode
In the pure bridge mode, the MT882 functions as a bridge. You
need to install the PPP dial-up software in your computer to access the
Internet.
This section describes how to configure the MT882 to work in the
pure bridge mode. It also describes how to configure your computer to
access the network through the MT882.
4.3.1
Preparation
Table 4-2 lists the configuration items.
Table 4-2 Configuration items for the pure bridge mode
Item
PVC Mode
Active
VPI/VCI
Encapsulation
PPP dial-up software
Username and password
for the PPPoE dial-up
Configuration
Bridge
Yes
Provided by the ISP
RFC2684
Install the PPP dial-up software to your
computer to access the Internet (The
Windows XP operation system is
provided with the PPP dial-up software)
Provided by the ISP
32