Steps - Huawei SmartAX MT882 User Manual

The data between the MT882 and the DSLAM are transmitted in
the Asynchronous Transfer Mode (ATM). To configure the MT882 for
different services, you need to configure the Permanent Virtual
Channel (PVC) and other parameters.
4.1.2

Steps

The steps to configure the service modes are as follows.
Step
Establish the
1 configuration
environment
Configure the
2
MT882
Configure
3
your computer
Note:
DHCP = Dynamic Host Configuration Protocol
To...
See section 2.3 "Setting Up the
Configuration Environment."
1)
2)
3)
4)
Configure the parameters of the Ethernet
card on your computer according to the
service mode of the MT882. Alternatively,
install the dial-up software in the computer.
Choose the PVC to be configured.
Choose the service mode of the PVC
and configure the parameters of the
PVC.
Configure other options, such as the
DHCP function.
Save the configuration and reboot the
MT882.
29
Do...