Chapter 2 Installation of the MT882
This chapter introduces the installation of the MT882.
2.1 Preparation
Before installing the MT882, prepare the following components:
Ethernet card: The MT882 communicates with a computer
through an Ethernet card. Make sure that an Ethernet card is
installed on the computer before connecting the MT882 with
the computer.
Splitter (optional): A splitter can separate the data signals
from the voice signals being transmitted over a telephone line.
Only with this component can you make a telephone call and
access the Internet at the same time.
2.2 Connecting the MT882
You can connect the MT882 according to Figure 2-1.
6