Configuring The Pppoa Mode - Huawei SmartAX MT882 User Manual

2) Choose Basic > WAN Setting in the navigation tree to
display the WAN configuration page.
3) Choose the PVC to be configured and click the editing icon.
4) Select Routing in the PVC Mode field.
5) Select PPPoE from the Encapsulation drop-down menu.
Set the Active to Yes. Configure relevant parameters
according to the values in the Table 4-3.
6) Click Submit.
7) Choose Basic > DHCP in the navigation tree to display the
DHCP configuration page.
8) Choose DHCP Server and click Submit.
9) Choose Tools > Reboot in the navigation tree.
10) Select Current Settings in the Reboot page. Click Restart
to save the configuration.
II.
Configuring Your Computer
Configure the Ethernet card on your computer, so that your
computer can automatically obtain such information as the IP address,
gateway and Domain Name Server (DNS).

4.5 Configuring the PPPoA Mode

In the PPPoA mode, the MT882 uses the built-in PPP dial-up
software for dialing.
It is similar to configure the PPPoA mode as to configure the
PPPoE mode. The differences are: if configure the PPPoA, select
PPPoA from the Encapsulation drop-down menu; if configure the
36