Huawei SmartAX MT882 User Manual page 21

IPADDR=192.168.1.2
NETWORK=192.168.1.0
BROADCAST=192.168.1.255
Note:
This step will create a new Ethernet interface eth1 and configure this
properties.
6) Create or modify the file named resolv.conf in
/etc/sysconfig/networking/profiles/default/. Add the
following content:
nameserver <ip of your primary DNS>
nameserver <ip of your second DNS>
Note:
This step is configuring your DNS setting. Note that <ip of your * DNS>
is the actual IP address of the DNS which you should get from your ISP.
7) Create a new file named ifcfg-eth1 in
/etc/sysconfig/network-scripts/. Add the following content:
DEVICE=eth1
13