Operation:
1)
Connect the interfaces of the splitter with other devices by
using a telephone line:
LINE interface --> telephone jack on the wall
MODEM interface --> ADSL interface of the MT882
PHONE interface --> telephone
2)
Connect the Ethernet interface of the MT882 with the
Ethernet interface of the computer by using a straight through
cable.
3)
Connect the MT882 to a power socket by using the provided
power adapter.
4)
Press the Power button of the MT882 to power on the
MT882.
5)
Check the Power indicator on the front panel of the MT882.
If it is on, the MT882 is powered on.
2.3 Setting Up the Configuration Environment
You can configure the MT882 through the Web setup page. This
chapter describes how to set up the configuration environment of the
MT882.
2.3.1
Planning the Parameters
Before setting up the configuration environment, plan the following
parameters.
8