Section 3 - Configuration
Use MAC (Media Access Control) Filters to authorize wireless clients to access your network by their MAC addresses. When enabled, you can choose
to either block the devices listed, or allow only the devices listed.
Configure MAC
Set MAC Filtering to ALLOW, DENY, or Turn
Filtering:
MAC Filtering OFF. ALLOW means only the
devices listed can access the network. DENY
means the devices listed cannot access the
network.
Description:
For your convenience, enter a description, like
My PC or My friend's smartphone.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on your computer,
refer to
Save Settings to activate and save.
Note: If you are filtering to ALLOW only the listed
devices, make sure to add your own computer to
the list or you will be denied access to the network
and the configuration utility. If you DENY the
listed addresses, be sure your computer is not on
the list.
Clear:
Click to clear the rule from the list.
Note: you will have to Save Settings in order for the rule to take effect.
D-Link DHP-W311AV User Manual
MAC Address Filter
"Networking Basics" on page
Advanced
57. Click
22