Section 3 - Configuration
It is recommended to enable encryption on your wireless DHP-W310AV before your wireless network adapters. You should establish wireless
connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the DHP-W310AV (192.168.0.50)
or http://dlinkapWXYZ.local. (on the Wi-Fi Configuration Card).
Click on Setup > Wireless Settings.
2. In the WI-FI Security Mode section, next to Security Mode, select
WPA/WPA2Personal.
3. For Wi-Fi Password, enter a key. The passphrase must be
between 8-63 characters and use numbers, letters, and/or
special characters.
4. Click Save Settings at the top of the window to save your
settings. If you are configuring the DHP-W310AV with a wireless
adapter, you will lose connectivity until you enable WPA on
your adapter and enter the same passphrase as you did on the
DHP-W310AV.
D-Link DHP-W311AV User Manual
Configuring WPA/WPA2 Personal
39