Advanced; Dns - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
Configuring via Web-based Interface
User Manual

Advanced

In this menu you can add name servers and also configure autonegotiation or manually configure
speed and duplex mode for the Ethernet port of the extender.

DNS

On the Advanced / DNS page, you can add DNS servers to the system.
Figure 52. The Advanced / DNS page.
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet.
On this page, you can specify the addresses of DNS servers manually.
If you want to specify the DNS server, click the ADD SERVER button (use the Name Servers
IPv4 section for IPv4 and the Name Servers IPv6 section for IPv6) and enter a DNS server
address. Then click the APPLY button.
To remove a DNS server from the page, click the Delete icon ( ) in the line of the address and
then click the APPLY button.
If needed, you can add your own address resource record. 4 To do this, click the ADD button.
Figure 53. The window for adding a DNS record.
4 You need to specify the IP address of the extender as a DNS server for clients of the DAP-1610 device to allow them
to use the records.
Page 67 of 91